Honestly Compared logoHonestlyCompared
HEAD-TO-HEAD • HONEST VERDICTS
Home › Comparisons › Coffee Grinders › Baratza Encore ESP Pro vs Baratza Virtuoso+

Baratza Encore ESP Pro vs Baratza Virtuoso+: Which Should You Buy?

Baratza Encore ESP Pro vs Baratza Virtuoso+ coffee grinders side by side

Two Baratza grinders with screens, timers and the same burrs — and until recently, only one of them existed.

For years the Virtuoso+ was Baratza’s answer to a simple request: a grinder with a display and timed dosing. The Encore line was the manual one — a knob, a switch, no electronics. Then Baratza rebuilt the Encore ESP into the Encore ESP Pro, and gave the Encore line a display, a timer and a stepless dial.

So the old map no longer works. Both grinders run the same 40 mm M2 conical burr set at the same 550 RPM, and both dose by time to a tenth of a second. The differences are adjustment, dosing, and which drink each was built around.

One naming warning, because Baratza’s range invites the mistake: the Encore ESP Pro (model ZCG595) is not the Encore ESP (ZCG495) — a different, stepped grinder with no display and no timer. This guide covers the Pro, from Baratza’s own product sheets.

Key Takeaways

  • The Encore ESP Pro wins this comparison. Stepless adjustment with a digital readout, two hands-free dosing modes and an ioniser give it the deeper toolkit on the same burr set.
  • The burrs and drive are shared. Both run Baratza’s 40 mm M2 conical burrs by Etzinger at 550 RPM — grinding hardware is not the reason to pick either one.
  • Adjustment is the headline gap. The ESP Pro is stepless, with 40 of its 60 display positions inside the espresso zone. The Virtuoso+ clicks through 40 steps spread evenly across its range.
  • The Virtuoso+ still doses well. Its 40-second timer matches the Pro’s 0.1-second accuracy — what it lacks is the Pro’s single-dose auto-stop mode.
  • Ownership is level. Same 1-year US warranty, same Baratza parts catalogue; the Pro’s quick-release burr is the one service edge.

Quick Verdict

Buy the Baratza Encore ESP Pro for most espresso-leaning home bars. It is the more capable grinder built on this shared platform.

Its dial never clicks: sit anywhere between settings, and the display reads your position back to the half step, with an ESP marker in espresso territory. A flow control disk meters beans into the burrs, an ioniser fights static, and single-dose mode stops the motor by itself when the chamber empties.

Buy the Baratza Virtuoso+ if filter coffee runs your kitchen. Its 40 steps spread evenly from fine to French press, its hopper is the bigger one on Baratza’s sheet, and its timer repeats a batch dose every morning with nothing new to learn.

It is the simpler, calmer machine — and for pour-over, drip and press pots, that even spread is a feature.

The Scorecard

Scores below are derived directly from the manufacturer specifications compared in this guide — burr sets, adjustment ranges, dosing systems, published outputs and warranty terms. A reading aid, not benchmark results.

CategoryBaratza Encore ESP ProBaratza Virtuoso+
Burr set
8.5 / 10
8.5 / 10
Adjustment & espresso resolution
9.5 / 10
7 / 10
Dosing & workflow
9.5 / 10
8.5 / 10
Motor & published output
7.5 / 10
8 / 10
Brew-method range
9 / 10
8.5 / 10
Build, footprint & capacity
8 / 10
8 / 10
Warranty, support & repairability
8.5 / 10
8 / 10
Overall8.6 / 108.1 / 10

Where the two share hardware the card is tied; where they differ — the dial and the dosing — the newer machine pulls ahead.

At a Glance: Who Each Grinder Fits

Baratza Encore ESP Pro coffee grinder — manufacturer image

Baratza Encore ESP Pro

  • Stepless adjustment with a digital readout — settings 0–60, ESP indicator in the espresso zone
  • 40 mm M2 conical burrs by Etzinger — the same burr set as the Virtuoso+
  • Two hands-free modes: single-dose with auto-stop, and a timer with 0.1-second accuracy
  • Flow control disk feeding the burrs, plus ion-generation anti-static — a Baratza first
  • Cast zinc and plastic body, LED-lit grounds bin, tool-free quick-release burr
View on Amazon
Baratza Virtuoso+ coffee grinder — manufacturer image

Baratza Virtuoso+

  • 40 mm M2 conical burrs by Etzinger — the burr set Baratza builds its reputation on
  • 40-second digital timer, adjustable in 0.1-second increments, with a backlit display
  • 40 settings spread evenly across a 250–1200 micron range (Baratza product sheet)
  • LED-illuminated grounds bin, so you can watch the dose land in a dark kitchen
  • ABS-and-metal construction, 3.6 kg — the heavier, more planted of the two
View on Amazon

Choose the Baratza Encore ESP Pro if…

Espresso is a hobby, not just a drink. A stepless dial and a readout you can return to are the tools dialling-in needs.

You single-dose. Weigh the beans, drop them in, walk away — the grinder stops itself when the chamber runs empty.

You rotate beans and methods daily. Forty of the sixty display positions sit in the espresso zone; filter settings live just past them on the same sweep.

Choose the Baratza Virtuoso+ if…

Filter coffee is the main event. One evenly spread dial covers pour-over, drip, AeroPress and French press with no dead zones.

You want yesterday’s dose repeated, not re-engineered. Set the timer once; the same amount lands in the bin every morning.

You prefer clicked settings you can write down. Step 18 is 18 on every Virtuoso+ — recipes transfer between owners exactly.

As an Amazon Associate I earn from qualifying purchases at no extra cost to you.

Specifications: The Specs That Actually Matter

Every figure below comes from Baratza’s own published data: the official product sheets for both models, with dealer-carried Baratza data only where the sheets are silent — and one genuine conflict between Baratza documents, flagged where it appears.

SpecificationBaratza Encore ESP Pro (ZCG595)Baratza Virtuoso+ (ZCG587)
Model codesZCG595 (black finish: ZCG595BLK)ZCG587 (black finish: ZCG587BLK)
Burr set40 mm M2 conical, hardened steel, made by Etzinger in Liechtenstein40 mm M2 conical, hardened steel, made by Etzinger in Liechtenstein — identical
Adjustment systemStepless collar under the hopper; display reads the setting 0–60 in half steps, ESP indicator in the espresso zone40 stepped settings, adjusted by twisting the hopper
Espresso resolutionSettings #1–40 sit in the espresso zone; about 2.2 microns of burr movement per increment; 200% more espresso-range resolution than the Encore ESP (Baratza)Steps spread evenly across the full range; no espresso-dedicated zone
DosingTwo hands-free modes: Single Dose Mode with auto-stop, and Timer Mode with 0.1-second accuracy; single rotary knob40-second digital timer, 0.1-second resolution; front pulse button; side on/off switch
Feed & static controlRemovable flow control disk meters beans into the burrs; integrated ion-generation anti-staticNeither — beans feed freely; no anti-static system
DisplayBright multi-modal display (setting, mode, timer countdown); LEDs illuminate the grounds binBacklit digital timer display; LED-illuminated grounds bin
MotorDC motor with gear reduction70 W DC motor with gear reduction and thermal cutout
Burr speed550 RPM (no load), published on the product sheet550 RPM (no load) per Baratza specification data; the current sheet does not print one
Published grind output1.13 g/sec at #20 to 1.49 g/sec at #50 with the flow control disk; 1.15–1.64 g/sec without it (product sheet)1.3 g/sec at setting #10 to 2.4 g/sec at setting #30 (product sheet)
Grind range (manufacturer)Espresso (#1–40) through pour-over, drip, French press and cold brew (#41–60), per Baratza’s setting charts; no micron range published250 to 1200 microns (current sheet)
Bean hopper200 g installed; 45 g without it, using the included single-dose lid (product sheet — see the figures note below)300 g with lid; optional hopper extender adds 250 g
Grounds handling120 g grounds bin, plus dosing cup (40 g) for 54 mm baskets with 58 mm adapter120 g grounds bin, LED-illuminated; optional Portaholder accessory
Burr mountQuick-release — lifts out without toolsThreaded
Dimensions (W × D × H)5.1 × 5.9 × 13.4 in (13 × 15 × 34 cm)5.1 × 5.9 × 13.4 in (13 × 15 × 34 cm) — identical
Weight3.08 kg (6.8 lb) per the product sheet — see the figures note below8 lb (3.6 kg)
HousingCast zinc and plastic (anodised cast zinc)ABS plastic and metal
Power (US build)100–120 VAC, 130 W per the product sheet — see the figures note below100–120 VAC, 70 W
Warranty1-year manufacturer’s warranty (US; 2 years in EMEA & APAC)1-year manufacturer’s warranty

The name note: three grinders share the Encore surname. The standard Encore is the entry model. The Encore ESP (ZCG495) is the stepped espresso model — dual-range dial, dosing cup, no display, no timer. The Encore ESP Pro (ZCG595), the grinder in this guide, arrived later with stepless adjustment, a display, both dosing modes and the ioniser. Read the full model name and code on any listing.

The figures note: Baratza’s own publications disagree about three ESP Pro numbers. The official product sheet — the document we print from, as with every Baratza in this series — states a 200 g hopper, 3.08 kg weight and 130 W power. Baratza product data carried by authorised dealers instead prints 300 g, 3.84 kg and 70 W, figures that match the older Encore ESP’s sheet rather too neatly. Footprint, burrs, speeds and bin capacity agree everywhere.

The hopper note: the Virtuoso+ sheet prints 300 g as its headline hopper specification — then describes “the existing 225 g bean hopper” in its accessories text, a line carried over from the older Virtuoso. We print the headline figure: 300 g.

The Differences That Actually Matter

1. First, the name trap — ESP Pro is not the ESP

Start here, because more buyers will get this wrong than any other thing in this comparison.

The Encore ESP (ZCG495) and the Encore ESP Pro (ZCG595) are separate grinders. The ESP clicks through 40 stepped settings, has no display, no timer and no ioniser, and doses by hand. The Pro is stepless, screened and dual-mode. They share a surname, a silhouette and a burr set — and almost nothing about how you use them.

It matters here because the Virtuoso+ used to be the automatic answer to “which Baratza has the timer?” It no longer is. The Pro gives the Encore line the Virtuoso+’s party tricks — display, timed dosing, lit bin — and adds two the Virtuoso+ never had: stepless adjustment and auto-stop single-dosing. On the spec sheets, the espresso-first rebuild has overtaken the all-rounder.

2. Adjustment — stepless with a readout against forty honest clicks

This is the widest gap in the comparison, and it is not close.

The Encore ESP Pro does not click. Its collar turns smoothly through roughly 250 degrees, and a digital decoder reads the position back on the display from 0 to 60 in half steps. Forty of those positions — the whole lower sweep — sit in the espresso zone, where each increment moves the burrs about 2.2 microns: 200 percent more espresso-range resolution than the Encore ESP, per Baratza.

The Virtuoso+ clicks through 40 steps spread evenly across its 250–1200 micron range. Every click moves the burrs by roughly the same amount, at the French press end and the espresso end alike. For filter brewing that is genuinely good design — no dead zones, predictable travel, a number you can write in a recipe and return to exactly.

Judgement: for espresso, stepless wins outright — the shot that runs two seconds fast is a nudge away, not a full click into overshoot. For filter it is closer: the Pro is stepless there too, but its filter zone is the top third of the dial, while the Virtuoso+ gives filter the whole dial. Resolution belongs to the Pro; recipe-repeatability belongs to the clicks.

3. Dosing — two hands-free modes against one very good timer

The Virtuoso+ doses by time, and does it properly: a digital timer runs the motor for up to 40 seconds, settable in 0.1-second increments on a backlit display, with a pulse button to top up. Set the seconds once and the same dose lands every morning.

The Encore ESP Pro matches that and keeps going. Its Timer Mode also doses to 0.1-second accuracy, countdown on the display. But it adds a mode the Virtuoso+ has no answer for: Single Dose Mode. Pre-weigh your beans, fit the included single-dose lid, press start — and the grinder stops itself when the chamber runs empty. No watching, no scale under the bin.

Underneath both modes sits the Pro’s flow control disk, a removable insert above the burrs that meters bean flow into the grind chamber — first bean and last meet the burrs at the same rate. It is also why the Pro’s published grind speeds are quoted with and without it.

Judgement: if your routine is one bean and one drink repeated, the timers tie. The moment you single-dose or rotate beans, the Pro’s auto-stop mode earns its place daily.

4. Espresso — a zone of its own against a shared dial

Both grind fine enough for espresso, per Baratza’s own setting charts. The difference is what happens when the shot is nearly right.

On the ESP Pro, dialling in is continuous: forty display positions in the espresso zone, an on-screen indicator, increments of roughly 2.2 microns, and a dosing cup in the box sized for 54 mm baskets with a 58 mm adapter. The whole front of the machine is arranged around a portafilter.

On the Virtuoso+, espresso shares a dial with everything else. The fine end does the job — pressurised baskets, the forgiving kind shipped with most entry-level machines, will never expose the gap — but on an unpressurised basket with a demanding light roast, its even steps can land you between settings: exactly the problem the Pro’s stepless sweep erases.

Judgement: the ESP Pro is the espresso instrument here, by design and by specification. The Virtuoso+ treats espresso as one stop among many — competently, but as a guest.

5. Motor and output — the same drive, measured two ways

The platform underneath is shared: a DC gear-reduced motor turning the same M2 burr set at the same published 550 RPM. Baratza built the Pro on the Encore mechanical base, and the burr speed did not change.

Published throughput differs. Baratza measures the Virtuoso+ at 1.3 g/sec at setting #10 rising to 2.4 g/sec at #30. The Pro’s sheet quotes 1.13 g/sec at #20 to 1.49 g/sec at #50 with the flow control disk fitted, and 1.15–1.64 g/sec without it — deeper, finer test settings, with a disk that deliberately slows the feed. Even so, on Baratza’s own numbers the Virtuoso+ is the faster grinder at the settings published. (The sheet also rates the Pro at 130 W against the Virtuoso+’s 70 W — but wattage is a rating, not a result, and dealer-carried data prints 70 W for the Pro too.)

6. Static, mess and what lands in the cup

The ESP Pro is the first Baratza grinder with active anti-static technology: an ion generator neutralises static on the grounds as they leave the chamber, so less coffee clings to the bin, the cup and the counter. Baratza lists it as a headline feature.

The Virtuoso+ has no anti-static system. Its defence is the older one: an LED-lit bin so you can see the dose, and grounds that behave as grounds from a 550 RPM conical burr set usually do — manageable, not solved.

Paired with the flow disk’s steadier feed, this is the Pro’s quiet daily-life advantage: less spray, less cling, less sweeping. It changes what is on the counter, not what is in the cup.

7. Build and ownership — cast zinc against metal trim, one faster burr swap

On the counter the two occupy identical space: 13 × 15 × 34 cm. The materials part there. Baratza builds the ESP Pro from cast zinc and plastic — anodised cast zinc in the body, with a die-cast, precision-machined adjustment mechanism — where the Virtuoso+ is ABS plastic with metal trim.

Weight is where Baratza’s paperwork argues with itself. The Virtuoso+ is a settled 3.6 kg. The Pro’s sheet says 3.08 kg; dealer-carried Baratza data says 3.84 kg. We print the sheet figure and flag the conflict — either way, both stay put on the counter.

Warranty and support are identical — one year in the US, the same parts diagrams, repair guides and spares catalogue. The one divergence is the burr mount: quick-release and tool-free on the ESP Pro, threaded on the Virtuoso+. Cleaning and burr replacement are minutes on the Pro, and merely straightforward on the Virtuoso+.

Brew-Method Fit Guide

Start from what you actually brew. This table is the whole comparison in one view.

Your brewingBaratza Encore ESP ProBaratza Virtuoso+Our call
Espresso, unpressurised basketsExcellent — stepless, 2.2-micron increments, ESP-zone readoutWorkable — even steps can land between settingsBaratza Encore ESP Pro
Espresso, pressurised basketsExcellentExcellent — forgiving grind, timed doseEither — both timers earn their keep
Pour-over & dripExcellent — stepless through the filter zoneExcellent — even steps, timed batch dosesDead tie — pick on workflow
AeroPress & moka potExcellentExcellentDead tie
French press & cold brewGood — coarse end tops one shared sweepExcellent — even travel to the coarse endBaratza Virtuoso+
Single-dosing different beans dailyExcellent — auto-stop mode, lid and dosing cup in the boxWorkable — weigh in, grind through; no dedicated modeBaratza Encore ESP Pro
Back-to-back drinks for a householdExcellent — timer mode repeats the dose hands-freeExcellent — set the timer once, repeat all morningDead tie

Read the first and sixth rows together — they are the Pro’s whole argument. The more your coffee life revolves around the portafilter and the scale, the further the Pro walks away with this.

Ready to check today’s price?

Both grinders sell through Amazon. Prices move, so check the live figure on the grinder that fits how you brew.

View on Amazon — Baratza Encore ESP ProView on Amazon — Baratza Virtuoso+

The 30-Second Decision

If this sounds like you…Buy this
“My shots keep landing between clicks — I need to land between settings.”Baratza Encore ESP Pro
“I weigh every dose and rotate beans constantly.”Baratza Encore ESP Pro (auto-stop single-dose mode)
“I brew a bit of everything and want one grinder that just handles it.”Either — Virtuoso+ if filter leads, Pro if espresso leads
“Two of us drink filter coffee all day; I will not weigh every dose.”Baratza Virtuoso+ (the timer and the bigger hopper)
“I write settings down and expect the same number to mean the same grind.”Baratza Virtuoso+ (clicked steps are exactly repeatable)
“Counter space is tight.”Dead tie — the footprint is identical
“I maintain my own kit — show me the parts catalogue.”Either — but the Pro’s quick-release burr is nicest to service

What You Gain. What You Give Up.

Baratza Encore ESP Pro

You gain: a stepless dial with a digital readout and an espresso zone forty positions wide, a single-dose mode that stops itself, a flow control disk feeding the burrs evenly, an ioniser fighting static, and a cast-zinc body with a tool-free burr.

You give up: clicked certainty. A stepless setting is a position you read off a display, not a detent you can feel — plus hopper capacity on Baratza’s own sheet, and the Virtuoso+’s higher published grind speeds.

Baratza Virtuoso+

You gain: forty evenly spread, exactly repeatable settings, a proven 0.1-second timer, the bigger hopper on the sheet, faster published grind speeds, and the heavier, more planted feel.

You give up: espresso finesse and single-dose automation. No stepless control, no auto-stop, no flow disk, no ioniser — and the threaded burr mount makes cleaning slower.

Pros and Cons

Baratza Encore ESP Pro — Pros

  • Stepless adjustment with a digital readout — 2.2-micron increments in the espresso zone
  • Single-dose mode with auto-stop, plus a 0.1-second timer mode
  • Flow control disk and ion-generation anti-static — Baratza firsts in this class
  • Same M2 burr set as the Virtuoso+, by Etzinger
  • Cast zinc body and a quick-release, tool-free burr

Cons

  • Baratza’s own publications conflict on its hopper, weight and power figures
  • Published grind speeds are lower than the Virtuoso+’s on Baratza’s sheets
  • Stepless settings are read, not clicked — less tactile repeatability for filter recipes
  • No micron grind range published; range is expressed in settings

Baratza Virtuoso+ — Pros

  • Digital timer dosing in 0.1-second increments, up to 40 seconds
  • Same M2 burr set as the ESP Pro, by Etzinger
  • Evenly spread 40 settings — no dead zones for any brew method
  • Metal-and-ABS build; heaviest and most planted of the two
  • Backlit display and LED-lit grounds bin

Cons

  • Espresso steps are evenly spread — dialling in can land between clicks
  • No single-dose mode, auto-stop, flow disk or anti-static system
  • Threaded burr mount — slower to clean and swap than the Pro
  • Baratza’s current sheet does not print a burr speed

Check the Model Code, the Display and the Box Contents

Check it is the Pro — model ZCG595. The check that matters most in this guide. The Encore ESP (ZCG495) wears a near-identical body with no display, a stepped dial and a side switch; the standard Encore sits below both. A listing headlined “Encore ESP” at a keen price is usually the stepped machine. The grinder here is the Encore ESP Pro, model ZCG595: stepless, encoder knob, bright display.

Check the front panel. A genuine ESP Pro shows its setting as a number on the display, ESP indicator lit in the espresso zone. A plain pulse button and no screen means it is not the Pro, whatever the headline says.

Check the box contents. The ESP Pro should arrive with the bean hopper, single-dose lid, dosing cup with 58 mm adapter, grounds bin and cleaning brush. A box missing the lid or cup is old stock, a return, or the wrong model. The Virtuoso+’s Portaholder and hopper extender are paid accessories — do not pay a bundle price as if they were included.

Check it is the Plus. The original Virtuoso (ZCG585) predates the Virtuoso+ (2019): same burrs and silhouette, but no digital timer and no illuminated bin. The one in this guide is the Virtuoso+, model ZCG587.

Check the voltage. Both come in 120 V and 220–240 V versions. Buy the version made for your sockets; the warranty follows the territory — and the ESP Pro’s term doubles to two years in EMEA and APAC.

The Upgrade Path Test

A grinder earns its money in year two, not week one.

At first, both make good coffee from the same burr set. The ESP Pro is finer to tune; the Virtuoso+ is simpler to repeat.

Year two is where the ownership stories rhyme. On both machines, worn burrs are a spare part and an evening’s job — quicker on the Pro’s quick-release mount, slower on the Virtuoso+’s threaded one.

The real question is direction, not repairs. If your coffee drifts further into espresso — a better machine, unpressurised baskets, lighter roasts — the ESP Pro grows with you: its stepless dial and single-dose mode were the point all along. If your brewing spreads wider — more filter, more batches, more people — the Virtuoso+’s even range, bigger hopper and set-and-forget timer gain value monthly. Same foundation, two futures: buy the one you are heading for.

When to Skip Both

Honesty cuts both ways — some coffee drinkers should buy neither of these.

Skip both if you want the grinder itself to dose by weight. Neither machine has a scale in it; grind-by-weight lives a class up, in Baratza’s own Sette 270Wi and Vario W+.

Skip both if flat burrs are the point. Both are conical-burr grinders on the same M2 set; if your taste runs to the clarity-first flat-burr profile, look at flat-burr specialists instead.

Skip both for café or office duty. Both are home appliances, built to grind a dose at a time.

Warranty and Long-Term Support

There is less to separate here than the positioning suggests. In the US, both carry a 1-year manufacturer’s warranty, printed on Baratza’s own product sheets. The ESP Pro’s runs to two years in EMEA and APAC — worth knowing if you buy outside the US, and no use at all if you do not.

Support beyond the warranty is shared. Baratza runs the most owner-friendly operation in home coffee: published parts diagrams, repair guides, and every wear part — burrs included — sold separately for both.

The only maintenance difference is the burr mount: quick-release on the ESP Pro, threaded on the Virtuoso+.

Final Verdict

The Baratza Encore ESP Pro is the grinder we would put on most espresso-leaning counters.

It wins on capability per square centimetre. The stepless dial and its readout remove the oldest frustration in home espresso. The single-dose mode removes the scale from the counter. The flow disk and ioniser tidy up the two messes — uneven feeding and static — that rivals in this class tolerate.

Buy the Baratza Encore ESP Pro for espresso-first kitchens, for single-dosers and bean-rotators, and for anyone who has wished the right setting lived between two clicks.

View on Amazon — Baratza Encore ESP Pro

Buy the Baratza Virtuoso+ if filter coffee runs your household. Its evenly spread, exactly repeatable settings, bigger hopper and set-once timer make it the calmer daily tool for pour-over, drip and press — and its burrs are identical to the winner’s.

It loses this verdict on espresso range and automation, not on quality. In a filter-only kitchen, the order of this page would read the other way round.

View on Amazon — Baratza Virtuoso+

Frequently Asked Questions

Is the Encore ESP Pro the same grinder as the Encore ESP?

No — different machines sharing a surname. The Encore ESP (ZCG495) clicks through 40 stepped settings, has no display or timer, and doses by hand. The Encore ESP Pro (ZCG595) is stepless with a digital readout, and adds a timer mode, auto-stop single-dosing, a flow control disk and an ioniser. Listings confuse them constantly; check the model code.

Which grinder is better for espresso?

The Encore ESP Pro, on adjustment. Its stepless sweep gives the espresso zone forty display positions at roughly 2.2 microns of burr movement per increment, with an on-screen ESP indicator — a shot that runs fast is a nudge away, not a full click. The Virtuoso+ grinds fine enough, but its 40 steps are spread evenly across the whole range, so each espresso step is a bigger jump.

What is single-dose mode, and does the Virtuoso+ have it?

Single Dose Mode is the ESP Pro’s auto-stop setting: weigh a dose of beans, fit the included single-dose lid in place of the hopper, and the grinder stops by itself when the chamber runs empty. The Virtuoso+ has no equivalent — it doses by timer, or by hand with its pulse button.

Which grinder is better for pour-over and drip?

Close to a tie. The Virtuoso+ spreads its 40 steps evenly, so the filter range gets fine-grained, exactly repeatable control, and its timer doses a full batch — Baratza positions it as a manual-brewing grinder first. The ESP Pro is stepless through the filter zone too; choose on whether you prefer clicked settings or a continuous sweep.

Are the two grinders the same size?

Yes — both sheets give the same dimensions, 13 × 15 × 34 cm, and the same 120 g grounds bin. What differs is capacity and materials: a 300 g hopper on the Virtuoso+’s sheet against the Pro’s 200 g, and a cast zinc body on the Pro where the Virtuoso+ uses ABS and metal. Published weights for the Pro conflict (3.08 kg on its sheet, 3.84 kg in dealer-carried data); the Virtuoso+ is a settled 3.6 kg.

How do the warranties compare?

In the US they do not differ: both carry a 1-year manufacturer’s warranty on Baratza’s own product sheets, and the ESP Pro’s extends to two years in EMEA and APAC. Long-term, owners rely on the same thing for both — Baratza’s spare-parts catalogue, diagrams and repair guides.

Sources & Verification

Baratza Encore ESP Pro official product sheet v1.1 (ZCG595 documents) — M2 conical burrs, stepless adjustment, flow control disk, ion-generation anti-static, Single Dose Mode with auto-stop, Timer Mode with 0.1-second accuracy, grind speeds 1.13–1.49 g/sec with disk and 1.15–1.64 without (#20–#50), 200 g hopper / 45 g single-dose, 120 g bin, 40 g dosing cup, 550 RPM, 3.08 kg, 130 W, cast zinc and plastic, US 1-year warranty • Baratza Virtuoso+ official product sheet (ZCG587 documents) — M2 burrs, 40-second timer at 0.1-second resolution, 1.3–2.4 g/sec, 250–1200 micron range, 300 g hopper, 120 g bin, 3.6 kg, 70 W (120 V), 1-year warranty • Baratza launch materials and brew-guide setting charts (readout 0–60, espresso zone #1–40, 2.2-micron increments, 200% resolution claim) • Whole Latte Love manufacturer product data • Amazon listing data for both models, used for ASIN verification only. One conflict is carried openly in the text: dealer-carried Baratza data prints the ESP Pro at 300 g hopper, 3.84 kg and 70 W against the sheet’s 200 g, 3.08 kg and 130 W; the sheet governs, as it has for every Baratza in this series. Specifications verified November 2026.

James Wilson

James Wilson

James has been testing coffee gear and small kitchen appliances for over a decade and writes Honestly Compared's coffee and grinder guides. His rule for every comparison: the verdict has to survive the spec sheet, not the marketing page.

Affiliate disclosure: Honestly Compared is a participant in the Amazon Services LLC Associates Program. Links to Amazon on this page are affiliate links — if you buy through them we may earn a commission at no additional cost to you. It never changes a verdict.